SEL-111K "Chiffon"- an active information protection from TEMPEST

Home > Products > Signal blockers and noise generators > SEL-111K “Chiffon”- an active information protection from TEMPEST

SEL-111K “Chiffon”- an active information protection from TEMPEST

	SEL-111K Chiffon is an active information protection from TEMPEST leakage system is designed to protect information processed by technical means and systems by generating an electromagnetic field noise interference signal over a wide frequency range in space and electrical noise signals on the conductors, including on the ground circuit and the power supply conductive lines and engineering communications beyond the controlled area. Capabilities and features of the system: Use of the thermal noise source with digital processing provides a uniform linear spectrum of the noise signal over the entire frequency range. Separate adjustment of the output level of the noise per band allow optimal way to form a “protective interference” by reducing the levels of spurious electromagnetic radiation. Digital autonomous (password protected) management and control of system settings with the information output to the built-in LCD screen.
Remote control over Ethernet allows you to combine devices in a network to form a distributed information protection system of any object. The built-in counter of the total operating time of the generator interference with the registration of values in a secure non-volatile memory. Distributed control system and indicating normal operation or an emergency in parts of the system (visual, audio, text). Use a flat UWB antenna PA-111 significantly reduces installation time and system settings. The basic system configuration: Central generation block noise SEL-111G; Telescopic (whip) antenna TA-111 signal directing device to the power lines NS-111. Additional elements of the system: Ultra-wideband flat antenna PA-111; Wired device SEL SP-810 remote control; Wired via Ethernet controller bundled with specialized software SEL SP-830. The amount and composition of the elements of the system is selected depending on the characteristics and category of protected object.
Technical specifications:
The range of the generated noise signal	10 kHz – 3 GHz
Entropy noise ratio	0.9
Output of the magnetic antenna terminal	0.01 – 30 MHz
Output RF antenna, SMA connector	0.01 – 3000 MHz
The output terminals for connecting to wires, plug:	0.01 – 400 MHz
Range of noise level adjustment	from 0 to – 30 dB
Sub-band intervals to adjust the noise level at the output “A”	0.01-30, 30-140, 140-260, 260-400, 400-700, 700-1000, 1000-2000, 2000-3000 MHz
Sub-band intervals to adjust the noise level at the output of the “B”	0.01-1, 1-30, 30-140, 140-400 MHz
Built-in LCD screen size	62×18 mm
Indication of normal operation	LED and text
Indication of emergency mode	LED, text and audible (buzzer)
Controlling options	using panel, using remote control or network Ethernet 10/100
Power supply	220 V 50 Hz or via an external DC adapter 12V 2A
Dimensions of generator	225x150x75 mm